Following a few simple dos and don’ts will help your staff complete this task with more ease and success:

  1. Sort clothes according to temperature, working from coolest to hottest.
    • Iron silks and synthetics on low to medium heat (approximately 350°F)
    • Wool on medium to high,
    • Cotton and linens at high temperatures (400°F to 425°F).
    • Since the right temperature is critical, let the iron sit for a few minutes after you have adjusted the controls.
  2. Hang up or fold your garments immediately after ironing them.
  3. Never use circular strokes — it might stretch the fabric. Iron lengthwise and eliminate wrinkles by using the steam feature.
  4. When ironing large items, such as a tablecloth or curtains, set up two chairs next to the ironing board and fold the piece carefully onto the chairs as you work on it.
  5. Iron sensitive fabrics with a pressing cloth — a clean cotton cloth is placed under the iron as you work. Also, you can iron fabrics inside out to protect them from becoming scorched or shiny.
  6. Press pleats starting from the bottom, working from the inside of the pleat to the outside. Set pleats with a shot of steam.
  7. Let clothes sit for a few hours after you’re finished ironing to allow the creases to set.
  8. Be sure to clean the iron and descale it regularly to avoid hard water particles or old starch from the iron getting on garments.
  9. Use spray bottle with distilled water and/or starch for difficult wrinkles or stiffer garment.

Would you like to read more tips? Sign up to our newsletter today and get great tips delivered to your inbox!

Siguiendo los próximos consejos le ayudará a su personal completar esta tarea con más facilidad y éxito:

    1. Separe las prendas según la temperatura, que trabajan desde más frio a caliente.
      • Sedas de hierro y sintéticos en bajo a medio de calor (aproximadamente 350 ° F)
      • Lana en medio a alto
      • Algodón y ropa de cama a altas temperaturas (400 ° F a 425 ° F).

La temperatura adecuada es crítica, que la plancha repose por unos minutos después de haber ajustado los controles.

  1. Cuelgue o doblar las prendas inmediatamente después del plancharlos.
  2. Nunca utilice movimientos circulares – podría estirar la tela. Mueve la plancha a lo largo y eliminar las arrugas usando vapor.
  3. Al planchar artículos grandes, como un mantel o cortina, la creación de dos sillas junto a la tabla de planchar ayudara…dobla la pieza cuidadosamente sobre las sillas a medida que trabaja en él.
  4. Plancha tejidos sensibles con un paño de plancha – un paño de algodón limpio se coloca bajo la plancha a medida que trabaja. También, usted puede planchar telas de adentro hacia afuera para protegerlos de convertirse quemadas o brillosos.
  5. Plancha pliegues a partir de la parte inferior, trabajando desde el interior del pliegue hacia el exterior. Refuerza pliegues con una inyección de vapor.
  6. Deje que la ropa se sienta por unas horas después de que haya terminado de planchar para que los pliegues queden bien
.
  7. Asegúrese de limpiar la plancha y descalcificarla regularmente para evitar las partículas de agua dura o almidón en la plancha transferirse en las prendas.
  8. Utilice botella de rocear con agua destilado y / o almidón para las arrugas difíciles o una prenda más rígido.